10,000 lbs Car Lift L1100 2 Post overhead Car Auto Truck Hoist 220V OR 110V

1. Motor and Power:
   • 220V or 110V, 60Hz, single-phase, 3HP motor.
   • Lifting operation via an “Up” button and manual lowering via a lever.
   • Lifting capacity: 10,000 lbs.
2. Symmetrical Arm Assembly:
   • Straight front/rear 2-stage reach: 30.7″ to 48″.
   • Equal-length arms with drop-in lifting pads and truck adapters included.
3. Safety Mechanism:
   • Double-point safety lock release.
   • Automatic arm lock restraints.
   • Relief valve in the power pump to prevent overloading.
   • Up-limit switch to protect cylinder stroke.
   • Heavy-duty cables and pulleys to reduce stress and increase longevity.
4. Design and Build:
   • Dimensions:
     • Overall height: 145-5/8″.
     • Overall width: 133-1/4″.
     • Drive-thru clearance width: 100″.
     • Max lift height: 78-7/8″.
     • Base and steel column thickness provide stability and strength.
   • Ultra-high molecular self-lubricating nylon slider for smooth operation.
   • Includes anchor bolts and mounting hardware.

Installation Requirements:

1. Site Selection:
   • Adequate space for operation and lifting.
   • 220V or 110V, 30-amp, single-phase electrical source.
   • Free from overhead obstructions (electrical lines, supports).
   • Not suitable for outdoor installation unless weather-protection measures are taken.
2. Concrete Floor Requirements:
   • Minimum of 4” thick, 3,000 PSI reinforced concrete for lifts between 8,500 lbs and 10,000 lbs.
   • Avoid installation on cracked concrete, asphalt, or expansion seams.
3. Unloading:
   • Forklift or tractor required for unloading at the delivery site.
   • Terminal pickup available if the customer cannot unload.

Warranty:

• 12 months on all metal, pneumatic, electrical parts, and motors.
• Full refunds for factory defective items, including free shipping for replacements.

This car lift is designed for heavy-duty, safe lifting with a focus on durability and operational ease, ideal for professional garages.